Saris' Wheel Straps keep your front wheels from spinning and your handlebars from turning in the wind. They're made of tough nylon with easy-to-use buckle closures. Wheel Straps are sold in pairs.
$13.99 - $14.99
Simply insert Saris' Hitch Tite into the hitch receiver to give your Saris bike rack (sold separately) extra stability. The Hitch Tite is compatible with the Bike Porter Hitch 2-Bike, Freedom, Axis Steel, Axis Aluminum, Cycle-On, and T-RAX Sport racks.
Provides a clean and sleek look for your Saris Bones rack, these end caps allow excess strap length to be tucked neatly inside rack - Provides a clean and sleek look for your Saris Bones rack - Upgrade your current Bones or Bones EX rack (pre-2022) - Compatible with: Bones or Bones EX racks - Not compatible to use with any Bones Hitch racks or SUPERBones
Increase rack stability for a smoother ride, this clamp system securely tightens hitch rack to receiver. - Adds extra security to bike racks and hitch devices - Eliminates rattling and wobbling - Compatible with 2" receivers
Saris' Protect-O-Pads are foam blocks that separate and protect your bikes when multiple bikes are being transported. They come in packs of four.
Saris' Hatch Huggers fasten Saris racks (sold separately) to certain vehicles. They replace the regular straps for vehicles with glass hinge lines and vehicles with narrow gaps around the trunk.
Turn your hard to fit vehicle into a bike hauling machine, Hatch Huggers allow most Saris trunk mount carriers to be used on vehicles equipped with integrated spoilers or glass hatchbacks - Designed for cars that require a custom fit, including those with glass-hinge lines or surfaces that are difficult for traditional trunk rack hooks to secure to, such as plastic or squared off edges. - Hatch Huggers SL attach to your trunk rack using the existing j-hooks and straps - Quick and easy to install and attach to your Saris Trunk Rack. - Includes two bumpers that are compatible with existing rack straps and hooks for Saris trunk-mount bike racks. - Maximum capacity-two bikes, 35 lb. each, 70 lbs. total.
The Saris Leveling Block keeps your bike level with your trainer. - Adds stability to your training ride. - For use with any rear wheel-mounted trainer. - Raises front bicycle tire 1.1 inches (2.8 cm) off the ground
Keeps corrosive sweat from reaching your frame. - Cell phone pouch included.
- Includes clutch knob and L-bolt - Basic Trainer Clutch Knob is compatible with any Wind, Mag, Mag+, Magneto or Fluid trainer that already uses L-bolt - Magnus Clutch Knob should only be used with Magnus Smart Trainer - Watch our video to learn more
Adjust resistance on Mag trainer without leaving the saddle. - Quick Release mounting system fits most stems. - For use with the Mag bike trainer only
Saris' Locking Cable 8' keeps your bike and rack where you want them: attached to your vehicle. This braided, stainless-steel cable is 8-feet long for plenty of reach. Plus, the vinyl coating protects your vehicle's and bike's finish.
Saris' Locking Hitch Tite adds both stability and security to your hitch rack. It tightens up the interface between your rack and hitch to combat swaying and it locks your rack to your vehicle. It fits 1-1/4 and 2-inch threaded hitch-tites and is compatible with the 200/500 Series T-Rax, all Thelma racks, standard-model Cycle-Ons, and all the T-Bones racks (each sold separately).
The Saris thru axle adapter is designed for indoor use on Saris- or CycleOps-branded trainers only and should not be ridden outdoors. - Compatible with Classic series trainers and most Pro series trainers. Not compatible with PowerSync trainers. Contact us with trainer compatibility questions. - This adapter is designed to work with bikes that have a 142x12mm thru axle with 1.0 or 1.75 thread pitch. - The axle is threaded on both sides to fit both Syntace and Maxle/ABP style thru axle systems. - Many bike manufacturers do not publish thread pitch or hub spacing online. If you are unclear as to what type of thru axle your bike uses, please reach out to your local bike shop or the bicycle manufacturer directly. What's Included - Thru axle - Washers - End caps with bolts
Connect your PC to CycleOps VirtualTraining.
- Updated design, for use with all Saris racks where bikes are secured by the top tube - Bridges the gap from stem to seat tube, creating a virtual top tube - Useful on ladies and specialty frames
Easy to move rack to/from vehicle without any lifting, this wheeled dollie attaches quickly t- most 2" receiver compatible racks - Wheels ensure smooth and effortless transport of rack to/from vehicle without any lifting - Connects to 2" stinger with simple pin - Works with most Saris hitch racks and other racks that bolt t- vehicle receiver - Easy to remove
$49.99 $99.99 50% Off
Give your bike first-class treatment on the way to the ride. Saris' Traps Single Track mounts easily on the floor of your cargo area or truck bed and holds 2 bikes. Included is mounting hardware for three Traps fork mounts (sold separately).
Saris' Traps Wheel Holder mounts easily to your Saris Single or Triple Track (each sold separately) to keep your front wheel secured. It accepts the wheel with little or no quick-release adjustment. Mounting hardware is included.
Adapts a thru axle hub bike for a Saris bike trainer. - Trainer Thru Axle Adapter For Saris Trainers - Thread pitch: 1.00 & 1.75 What's Included: - Thru axle - Washers - Endcaps with bolts Trainer Compatibility The Saris Trainer Thru Axle Adapter is designed for indoor use on Saris trainers only and should not be ridden outdoors. Compatible with current basic trainers. Not compatible with CycleOps PowerSync trainers. Contact us with trainer compatibility questions. Bike Compatibility Many bike manufacturers do not publish thread pitch or hub spacing online. If you are unclear as to what type of thru axle your bike uses, please contact us.
TRAINER THRU AXLE ADAPTER FOR SARIS TRAINERS WHAT'S INCLUDED: - Thru axle - Washers - Endcaps with bolts - The 148x12mm adapters also come with a shorter bolt action slider tube. TRAINER COMPATIBILITY The Saris Trainer Thru Axle Adapter is designed for indoor use on Saris trainers only and should not be ridden outdoors. Compatible with current basic trainers. Not compatible with CycleOps PowerSync trainers. Contact us with trainer compatibility questions. BIKE COMPATIBILITY Many bike manufacturers do not publish thread pitch or hub spacing online. If you are unclear as to what type of thru axle your bike uses, please reach out to your local bike shop or the bicycle manufacturer directly. Both 148x12 Thru Axle Adapters are compatible for both 142 and 148mm bikes. 148x12 Thru Axle Adapter, 1.5 Thread Pitch (9733T) works for: - 148 x 12mm - 142 x 12mm - 1.5 thread pitch
Bike fork mounts you can put anywhere, including truck beds, minivans and SUVs An all-in-one design that fits four thru axle spacing standards: - 15mm x 100mm - 15mm x 110mm - 12mm x 100mm - 20mm x 110mm - Mounts directly to any flat surface for bike transport or storage - Ultimate stability and versatility when mounted t- Saris Triple Track or Single Track (sold separately) - Mounting hardware not included
Easy to mount and a cinch to store in the back of your car, Saris’ Solo is a low-profile rack for peace-of-mind convenience. Solo’s uni-body frame has no adjustable parts, which makes it a no-brainer to set up. With its soft, rubber, pivoting feet and four hold-down straps, the Solo safely and securely attaches to your car. Two strong buckles and an integrated anti-sway strap keep your bike in place. As an added bonus, the Solo is built with 100% recyclable, non-rusting materials.
Protects your floor from sweat and bike grime. Product Features: - Protects your floor from sweat and bike grime. - Keeps your trainer from "walking" during intense workouts. - Durable construction absorbs vibration and noise. - Training mat measures 65 x 36 inches. - Black PVC foam gives the training mat superior sound absorption. - Resistant to moisture, and easy to clean with soap and water when necessary.
Saris' CycleGlide 2-Bike Add-On kit lets you hang two more bikes on your Saris CycleGlide overhead storage rack (sold separately).
Everything you need for the best indoor trainer experience possible. - Can be used across a wide range of trainer setups. - Includes Trainer Mat, Climbing Block and Saris towel.
All the Essentials of a Reliable Trunk Rack With the Guardian bike rack, what you see is what you get. And what you see is a complete trunk rack, simplified to its purest form. Made with steel sourced from America's heartland, the Guardian is tough enough to stand-up to the elements, yet gentle on bikes. Easy-to-use bike hold downs with ratcheting straps grip the bike's frame, while rack straps equipped with spring-loaded buckles ensure a snug rack-to-vehicle fit. This simple trunk rack fits most sedans, hatchbacks and vans, and comes completely assembled. Just take it out of the box, put it onto the car, and you'll be rolling in no time. Features - Carries 2 bikes (35 lb./bike) - A Bike Beam may be required for frames without a horizontal top tube. - Trunk bike rack. - No assembly needed. - Bike hold downs with ratcheting straps separate and firmly hold up to 3 bikes. - Bike rack straps with spring-loaded buckles ensure secure rack-to-vehicle fit. - Rack arms adjust to fit most sedans, hatchbacks and vans. - American-made steel frame construction. - Folds for compact, convenient storage. - Coated hooks protect vehicle's finish. - Heavy-duty foam pads protect vehicle's finish.
Simple. Reliable. American-Made. This entry-level 3-bike trunk rack gets you where you want to go. No frills, no complications—the Guardian is as simple as can be, without sacrificing security. Easy-to-use bike hold downs with ratcheting straps grip the bike's frame, while rack straps equipped with spring-loaded buckles ensure a snug rack-to-vehicle fit to keep precious cargo secure during transit. Plus, the Guardian 3-bike comes completely assembled and ready to go, right out of the box. What more could you ask for in a bike rack? Features - Carries 3 bikes (35 lb./bike) - A Bike Beam may be required for frames without a horizontal top tube. - Trunk bike rack. - No assembly needed. - Bike hold downs with ratcheting straps separate and firmly hold up to 3 bikes. - Bike rack straps with spring-loaded buckles ensure secure rack-to-vehicle fit. - Rack arms adjust to fit most sedans, hatchbacks and vans - American-made steel frame construction. - Folds for compact, convenient storage. - Coated hooks protect vehicle's finish. - Heavy-duty foam pads protect vehicle's finish.
Having enough room for another bike is rarely an issue with Saris' Traps Triple Track. Simply lay it on the floor of your SUV or place it in your truck bed and add your choice of attachments. Your bikes are guaranteed a stable ride. The unique design allows bikes to be staggered or angled for hauling more bikes in a compact space. Fork mounts and wheel holders are sold individually to let you customize your Triple Track.
Stick to your fitness plan year round with the help of the Saris Mag+ trainer. It is the perfect way to keep your legs warm when it's cold, dry when it's wet, and safe when it's too dark to ride outside. With this turbo trainer, it's easy to turn your bike into your go-to calorie burner — no matter the season. Simply attach the handlebar-mounted shifter to change resistance during your workout without having to leave your bike. Want to train with Zwift or Rouvy? All you need is a speed sensor. Visit our setup guide to learn how to get started. - Magnetic resistance unit provides a quiet and frictionless ride. - Linear resistance boosts workout intensity to match each pedal stroke and gear click. - Mag+ comes with convenient, adjustable handlebar-mounted shifter. - Compatible with Zwift and other indoor cycling apps
Page 1 of 2 Next page