Replacement straps for Sunlite FlatForm II pedals - Strap size: 340 x 55mm
Leveling block for indoor trainers
The Mag Riser Block 3 from Minoura lifts up your front wheel during a training session to be at a natural level. This block fits both MTB and Road bike tire widths. - Fits under front wheel to level the bike to get natural riding on training - Double grooved design fits your narrow or wide ties - Polyethylene material minimizes weight at 1/2 lb. - 8.6D X 4.7W X 2.75H (inches)
$24.99 $30.50 18% Off
Giant's Cyclotron Chopping Block supports and lifts your front wheel so you ride a level bike when you're on a trainer. It holds 700c and 26-inch wheels and has a stable, anti-skid base. It's made of ABS plastic for strength, low weight, and durability.
The Saris Leveling Block keeps your bike level with your trainer. - Adds stability to your training ride. - For use with any rear wheel-mounted trainer. - Raises front bicycle tire 1.1 inches (2.8 cm) off the ground
- Includes clutch knob and L-bolt - Basic Trainer Clutch Knob is compatible with any Wind, Mag, Mag+, Magneto or Fluid trainer that already uses L-bolt - Magnus Clutch Knob should only be used with Magnus Smart Trainer - Watch our video to learn more
For a stable, worry-free ride with any rear wheel-mounted trainer. Product Features - For a stable, worry-free ride with any rear wheel-mounted trainer. - Unique 3-level design lets you select the level of difficulty. - Stack two blocks to simulate climbing workouts. Three different positions to raise your front wheel and simulate hill climbs - 2.1 inches (5.3 cm) - 2.7 inches (6.8 cm) - 3.1 inches (7.9 cm)
Adjust resistance on Mag trainer without leaving the saddle. - Quick Release mounting system fits most stems. - For use with the Mag bike trainer only
The Saris thru axle adapter is designed for indoor use on Saris- or CycleOps-branded trainers only and should not be ridden outdoors. - Compatible with Classic series trainers and most Pro series trainers. Not compatible with PowerSync trainers. Contact us with trainer compatibility questions. - This adapter is designed to work with bikes that have a 142x12mm thru axle with 1.0 or 1.75 thread pitch. - The axle is threaded on both sides to fit both Syntace and Maxle/ABP style thru axle systems. - Many bike manufacturers do not publish thread pitch or hub spacing online. If you are unclear as to what type of thru axle your bike uses, please reach out to your local bike shop or the bicycle manufacturer directly. What's Included - Thru axle - Washers - End caps with bolts
Connect your PC to CycleOps VirtualTraining.
Save Your Tires for Race Day Frequent trainer riders often find the tread on their rear wheel will wear down over time. We recommend using our trainer tires on our Saris indoor trainers. They are made of tough material that can stand up to hours and hours and hours of training. Product Features - 700c x 23 – 25 fits most road bikes. - Ultra-quiet and super-durable. - For use with an indoor trainer only.
• 35.5-inches x 79-inches • Black
Adapts a thru axle hub bike for a Saris bike trainer. - Trainer Thru Axle Adapter For Saris Trainers - Thread pitch: 1.00 & 1.75 What's Included: - Thru axle - Washers - Endcaps with bolts Trainer Compatibility The Saris Trainer Thru Axle Adapter is designed for indoor use on Saris trainers only and should not be ridden outdoors. Compatible with current basic trainers. Not compatible with CycleOps PowerSync trainers. Contact us with trainer compatibility questions. Bike Compatibility Many bike manufacturers do not publish thread pitch or hub spacing online. If you are unclear as to what type of thru axle your bike uses, please contact us.
The Saris thru axle adapter is designed for indoor use on Saris- and CycleOps-branded trainers only and should not be ridden outdoors. Compatible with current classic series trainers. Not compatible with the JetFluid Pro, SuperMagneto Pro, PowerBeam Pro, or PowerSync trainers. Contact us with trainer compatibility questions. - This adapter is designed to work with bikes that have a 142x12mm or 148x12mm thru axle with 1.0 or 1.75 thread pitch. - The axle is threaded on both sides to fit Syntace and Maxle/ABP style thru axle systems. - Many bike manufacturers do not publish thread pitch or hub spacing online. If you are unclear as to what type of thru axle your bike uses, please reach out to your local bike shop or the bicycle manufacturer directly. - Adapts a thru axle hub bike for a trainer - Only compatible with current basic trainers - Fits most 142-148mm thru axle bikes with 1.0 or 1.75 thread pitch
The Wahoo KICKR Floormat is the perfect partner for your KICKR. It's water resistant and anti-slip to keep the trainer in place no matter how much you sweat! The thickness and material make it noise insulating, so your family will thank you during those early morning rides. - Impervious to sweat and spilled water bottles. - Gripping texture keeps the KICKR in place, so you can focus on your ride. - Material helps to reduce noise and make the KICKR even quieter. - Beveled edge keeps the mat in line with the floor.
All you need for cycling data, all together at once! The Wahoo RPM Speed and Cadence sensors are both a sleek, wireless, and magnet-less solution. Each mounts easily to your bike and the Bluetooth Smart and ANT+ duel band technology allows you to connect and display data on both smartphone and bike computers. - Dimensions (LxWxH): 1.25" x.75" x 1" - Weight: 7 grams (without mount) - Battery: CR2032 - Battery Life: Up to 12 months - Water Rating: IPX7 (waterproof up to 5 ft) - Wireless Signal Strength: Up to 10 feet - Note: Speed Sensor is NOT compatible with spin bikes
Everything you need for the best indoor trainer experience possible. - Can be used across a wide range of trainer setups. - Includes Trainer Mat, Climbing Block and Saris towel.
- Smooth and powerful magnetic resistance - Heavy-duty steel frame - Folds for easy storage - Fits MTB wheels 26"-29"
No fancy gizmos. No wires. No fuss. If you’re looking for an easy way to ride your bicycle indoors, call off the search – you’ve found it. Whether your training for a local charity ride or working to beat your friend’s FitBit score, the Mag indoor bike trainer can help you make it happen. Simply connect the trainer to the rear wheel of your bike, hop on, and pedal away. Plus, the Mag comes with five adjustable levels of resistance so you can adapt every ride to your liking. - Magnetic resistance unit provides a quiet and frictionless ride. - Linear resistance boosts workout intensity to match each pedal stroke and gear click. - Features five adjustable levels of resistance - Compatible with Zwift and other indoor training apps
$229.99 $230.99 On Sale
Hook your bike up to Sunlite's F2 Trainer and ride whenever you want, regardless of weather, daylight or schedule issues. It features a heavy-duty steel frame for a stable base when you're cranking on the pedals and a quiet magnetic resistance unit for a real-world feel.
$249.99 $272.99 8% Off
Hook your bike up to Sunlite's F1 Trainer w/Remote and ride whenever you want, regardless of weather, daylight or schedule issues. It features a heavy-duty steel frame for a stable base when you're cranking on the pedals and a quiet magnetic resistance unit for a real-world feel. The remote lever attaches to your handlebar for easy resistance adjustment. Plus, this trainer includes an easy-to-use steel quick-release lever.
The KICKR HEADWIND is the first ever smart fan, designed with the cyclist in mind. Its Targeted Airflow Pattern mirrors the shape and position of a cyclist's body while riding. The KICKR HEADWIND is sensor controlled so as your speed or heart rate increases, so will the fan speed, and there are also 4 manual speed settings should you want to set your own ideal airflow. With speeds of over 30 mph (48 kph), the KICKR HEADWIND will keep you cool during the toughest training sessions. - With wind speeds topping out at over 30 mph the KICKR HEADWIND will keep you cool during your hardest efforts. - The Targeted Airflow Pattern of the KICKR HEADWIND is designed to mirror the shape and position of a cyclist's body while riding on a bicycle. - Control the speed of your KICKR HEADWIND by pairing your ANT+ speed sensor, heart rate monitor, or smart trainer directly to the fan. As your speed or heart rate increases so will the fan speed. - Pair to the Wahoo App via Bluetooth for easy fan speed control at your fingertips. - Control the KICKR HEADWIND with a simple press of a button. Four (4) preprogrammed fan speeds allow you to select your ideal airflow. - The KICKR HEADWIND was specially designed to fit with the KICKR DESK. The wheels on the KICKR HEADWIND allow you to roll the fan into position when it is attached to your KICKR DESK.
Stick to your fitness plan year round with the help of the Saris Mag+ trainer. It is the perfect way to keep your legs warm when it's cold, dry when it's wet, and safe when it's too dark to ride outside. With this turbo trainer, it's easy to turn your bike into your go-to calorie burner — no matter the season. Simply attach the handlebar-mounted shifter to change resistance during your workout without having to leave your bike. Want to train with Zwift or Rouvy? All you need is a speed sensor. Visit our setup guide to learn how to get started. - Magnetic resistance unit provides a quiet and frictionless ride. - Linear resistance boosts workout intensity to match each pedal stroke and gear click. - Mag+ comes with convenient, adjustable handlebar-mounted shifter. - Compatible with Zwift and other indoor cycling apps
Take on any race, club ride, or weekend adventure with confidence. When you add Saris rollers into your training routine, you'll increase your balance, control, and ability to ride a straight line — all of which translate to more efficiency, power, and technique on the road. And, because you have to pedal 100% of the time to balance your bike, you get an amazing workout, no matter your pace. - Improve balance, control, and ability to ride a straight line. - Aluminum roller drums run silently and smoothly. - Precision-lathed 3.25" aluminum roller drums won't distort in heat or sunlight. - Fold flat or stand on end for convenient storage. - Designed for both indoor and outdoor use - 16" wide wheel base fits just about any size of bike and allows plenty of room to move around. - Rubber foot pads ensure that the only thing moving on the rollers are the drums, providing a secure, sturdy ride. - Durable steel-frame construction - Adjustable belt for right and left dismount - Resistance Roller uses zero moving parts to deliver quiet magnetic resistance. - Maximum wheelbase 44.5" (axle to axle) - Minimum wheelbase 37.5" (axle to axle)
The easiest, most affordable way to access to virtual training communities such as Rouvy and Zwift is with a basic bike trainer and a speed sensor. Enter: the Fluid Smart Equipped. Our sturdy trainer frame features a reliable and quiet fluid resistance unit and comes with a speed sensor that can be used for any virtual – or non-virtual – training ride. Simply install the magnetless speed sensor on the rear wheel of your bike, mount your bike to the Fluid bike trainer, connect to your virtual training application of choice via Bluetooth or ANT+, and ta da! – you’re ready to ride. In the box: - Fluid Smart Equipped Bike Trainer - Dual-band magnetless speed sensor Details: - Fluid resistance unit provides a quiet and consistent ride. - Progressive resistance offers the widest resistance range and road-like feel. - Foldable bike trainer frame - Included speed sensor connects you with Rouvy, Zwift, and other virtual training apps. - ANT+ USB and BlueGiga USB sold separately. - Eccentric leveling feet allow for easy adjustment on uneven surfaces. - Adjust tire fit to resistance unit with a convenient turn knob. - Resistance unit roller allows for 700c, 26", 27", and 29" wheel sizes – up to a 2.0-inch tire. - This trainer is designed to fit common road and mountain bike frames with included steel quick release skewer and is compatible with rear dropout spacing: 120mm, 130mm, and 135mm - Trainer tire recommended - Compatible with virtual training apps - All of our trainers are tested to the combined weight (rider and bike) of 300 lbs. - Optional thru-axle adapter available for 142x12mm and 148x12mm bikes (sold separately) - Trainer skewer included - Noise level at 20 mph is 68-72 decibels.
Better health. Faster splits. More me-time. Whatever your goals may be, the Fluid2 helps you get the most out of each indoor training ride. The large, precision-balanced flywheel (with patented fan design) lets you easily customize each ride simply by shifting gears, just as you would outside. This design also helps keep your Fluid2 working better – longer. And, thanks to our built-to-last manufacturing process, the Fluid2 can help you conquer one goal after the next. - Fluid resistance unit provides a quiet and consistent ride. - Progressive resistance offers the widest resistance range and road-like feel. - Best-selling trainer in the USA - Compatible with Zwift and other indoor cycling apps
Trainer Mission Control Every training room needs a control center, and the TD1 is more than equipped for the job. Featuring built-in power strip with 2 AC and 2 USB outlets, this indoor trainer desk was designed to keep everything you need charged, organized and close at hand. Its roomy 12" x 20" table top is made from laminated birch for easy clean up, and is supported by stainless, corrosion-resistant steel sourced from America’s heartland. And as part of the Saris trainer eco-system, the TD1 is a perfect complement to the MP1 trainer platform. After just one ride with a dedicated trainer desk, you’ll ask yourself how you ever rode indoors without one. - Stay Charged: built-in power strip keeps training necessities nearby and powered up. - Pick Your Height: adjustable for wide range of bikes and training configurations. - Easy Cleaning: laminated birch wood top makes for easy clean-up post-ride. - Steamlined Look: built-in cable management and stainless steel hardware are both functional and eye-pleasing. - Enhanced Experience: a great addition to indoor training. Specs - Base: 13-inches wide x 36-inches Depth - Desk Top: : 12-inches Width x 20-inches Depth - Adjustable Desk Height from Floor: 40- to 55-inches - Materials: Laminated birch table top supported by a steel frame, featuring stainless steel and corrosion-resistant hardware - Cord Length: 6- foot AC cord - Built-in power strip with 2 AC and 2 USB outlets - Built-in cord retention clips for easy cable management and a clean look.
A Killer Training Combo What happens when you pair a speed sensor with the #1 selling bike trainer in the USA? You get a combo that’s ready for any virtual—or non-virtual—training ride. It’s the ideal setup for budget-conscious athletes looking to join fun, virtual communities, like Rouvy and Zwift, without a traditional smart trainer. Simply install the magnetless speed sensor on the rear wheel of your bike, mount your bike to the solid Fluid2 trainer with our innovative club knob, connect to your virtual training app of choice via Bluetooth or ANT+, and voilà! - you’re ready to sweat. Product Features - Fluid resistance unit provides a quiet and consistent ride. - Progressive resistance offers the widest resistance range and road-like feel. - Included speed sensor connects you with Rouvy, Zwift and other indoor cycling apps. - ANT+ USB and BlueGiga USB sold separately. - Includes one month subscription to Rouvy virtual training app In the box: - Fluid² Smart Equipped Bike Trainer - Dual-band magnetless speed sensor - Fluid² is the best-selling trainer in the USA. - Fluid resistance unit creates optimal road-like feel. - Fluid resistance unit provides a quiet and consistent ride. - Noise level at 20 mph is super quiet 64-68 decibels. - Large, individually precision-balanced flywheel allows for improved road-like feel. - Self-cooling mechanisms including a patented fan design keeps the unit performing better, longer. - Eccentric leveling feet allow for easy adjustment on uneven surfaces. - Comes on the foldable Classic frame with spring loaded, bolt-action lever. - Precision-machined alloy roller reduces tire wear and slippage. - Features clutch knob for perfect roller-to-tire tension each ride. - 2" resistance unit roller allows for 650b, 700c, 26", 27" and 29" wheel sizes – up to a 2.0 tire. - This trainer is designed to fit common road and mountain bike frames with included steel quick release skewer and has three settings for rear dropout spacing: 120mm, 130mm and 135mm. - Trainer tire recommended. - Compatible with indoor cycling apps. - Trainer is tested to the combined weight (rider and bike) of 300 lbs. - Optional thru-axle adapter available for 142x12mm and 148x12mm bikes. - ANT+ USB and BlueGiga USB sold separately. - Formerly branded as CycleOps Fluid² Smart Equipped
The Wahoo KICKR SNAP makes indoor training a "snap!" It's a convenient, easy to set-up wheel-on smart trainer with the realistic ride experience Wahoo smart trainers are known for. The SNAP's legendary flywheel features technology that creates the same resistance experienced when riding outdoors. Plus, no other indoor bike trainer has more software training options, including Zwift and Trainer Road. The KICKR SNAP includes LED lights for connection status, third party power meter support, and the power measurement is now accurate up to +/-3%. - Designed for consistent power measurement of up to 1500W and accuracy of +/- 3% so that you can monitor and adjust your intensity. - Visual confirmation that KICKR SNAP is powered, connected and transmitting via Bluetooth Smart and/or ANT+ - Wahoo's KICKR CLIMB indoor grade simulator was designed in conjunction with the KICKR smart trainers to deliver an unmatched indoor training experience when combined. - KICKR HEADWIND was designed to deliver innovative climate control to your indoor training experience. - ANT+ and Bluetooth capabilities allow it to connect to both smartphones and GPS devices simultaneously or separately. An ANT+ FE-C connection allows the KICKR to be controlled from any FE-C enabled device or application. - SNAP's wheel-on design makes it easy to turn your road, mountain, or TT bike into a powerful indoor smart trainer. - Made from high strength carbon steel and featuring a wide stance, SNAP is designed to keep its feet firmly planted on the floor and your bike securely locked in so you can train with confidence. - When connected to your device, it automatically sets your resistance via your favorite app or software - The SNAP flywheel is innovative and proven technology emulates the power and inertia experienced during outdoor riding. It provides the most realistic ride feel especially when using virtual riding/training platforms like Zwift and Trainer Road. - Get vital cycling metrics on your indoor ride. - Low operating sound, so no shouting required! - Works with popular training apps such as Zwift, The Sufferfest, Fulgaz and TrainerRoad. - Compatible with a third party power meter.
Page 1 of 2 Next page