Shimano Ultegra/XT HG701 11-Speed Chain. - HG-X11 special asymmetric plate design for 11-speed. - SIL-TEC on Plate - Chain Connection Type: Pressed Pin - Drivetrain Speeds: 11 - Half Link Chain: No
Efficient SPD step-in design on one side with a flat platform on the other Improved flat side grip and control Low-maintenance, sealed cartridge axle unit Adjustable entry and release tension settings
Shimano's M520s are affordable clipless pedals that are easy to enter and exit and built to last. They boast dual-sided Shimano SPD bindings, which make them perfect for mountain bikers or roadies who prefer wearing walkable shoes with recessed cleats. The bindings are adjustable for dialing in the perfect entry and exit tension and these sweet pedals have an open mud-shedding design to prevent clogging. They feature chromoly axles and sealed bearings for durability, too.
Don't let a bent or worn dust cap sully an otherwise well-functioning Shimano Alfine internally geared hub. Get a spare and replace as necessary for continued performance and to preserve the longevity that you expect from Alfine.
- Hoods with (FD) are Flight-Deck compatible
Shimano Mountain Deore XT M8000 Shift Pod Cable Adjusting Unit
Shimano Front Derailleur Cable Fixing Assembly
- Replacement barrel adjuster for 105 5800 brakes
Need a Shift Cable Fixing Bolt Unit for your Alfine S7000/S700 hub? Here it is. Now, get that bike back on the road!
Do you need to replace the right lock washer seal on your Alfine SG-S700 internally geared hub? If you're not sure, it might not be a bad idea, as contamination from damaged or worn seals is the kryptonite of virtually maintenance-free internally geared hubs.
Shimano Rear Derailleur Cable Anchor Assembly - Fits SLX M7000-10
Keeping contamination out of your internally geared hub is critical to its function and longevity. Sometimes, the oil port bolt comes loose and it's easy to lose, even if you've just taken it out to oil your hub. Keep a spare or two so your hub stays clean inside and it'll last you many, many miles.
Shimano Dura-Ace R9100 Cassette Spacers
Keep the cable fixed securely in your Dura-Ace R9100 rear derailleur with this Shimano Rear Derailleur Cable Anchor Assembly
Shimano Wiring Plug Tool for use with Di2 - Tool is required to assist Di2 shifter plug installation - Shimano TL-EW02 tool for connecting and disconnecting the Di2 wiring harness and shifter plugs - For use with Dura-Ace 9070, Ultegra 6870/6770 and Alfine Di2 components and E-Tube wiring
Keep the cable fixed securely in your XTR M9000 rear derailleur with this Shimano Rear Derailleur Cable Anchor Assembly
Need a spare Shimano cable adjuster assembly for your Dura-Ace R9100 rear derailleur? You've found it. Making sure this part is in working order can mean the difference between a two-second barrel twist to return your shifting to perfect, or getting out the multi-tool to readjust the cable again and again until it's close enough to get home. Your choice.
Shimano Replacement pads for Mountain brake shoes - Color: Black - Intended Brake Type: Linear Pull - Pad Attachment Style: Threaded Post - Pad Type: Replacement Insert - Cartridge - Rim Compatibility: Standard - Shimano Cartridge-type mountain brake pads fit models: XTR BR-M970, BR-M960, BR-M951, BR-M950 XT BR-T780, BR-M770, BR-M760, BR-M750, BR-M739, BR-M737 LX BR-T670, BR-M580, BR-M570 Deore BR-M530, BR-M510 Alivio BR-M430, BR-MC18 Acera BR-M422, BR-M421, BR-M420, BR-M330, BR-T300 DXR BR-MX70 MX BR-M600 - M70R2: Severe condition brake pad, high performance in dry or wet conditions
New cones make hubs spin like silk. Take advantage of your Shimano Alfine hub's highly serviceable design, and replace the bearing cones if they are worn or damaged. This one is specifically for the right side.
Shimano Replacement pads for Mountain brake shoes - Shimano Cartridge-type mountain brake pads fit models: XTR BR-M970, BR-M960, BR-M951, BR-M950 XT BR-T780, BR-M770, BR-M760, BR-M750, BR-M739, BR-M737 LX BR-T670, BR-M580, BR-M570 Deore BR-M530, BR-M510 Alivio BR-M430, BR-MC18 Acera BR-M422, BR-M421, BR-M420, BR-M330, BR-T300 DXR BR-MX70 MX BR-M600 - M70CT4: Only for sidewall-machined rims; performs especially well in wet conditions and may pass DIN standard; tends to be low noise, low rim wear and fade - Color: Black - Intended Brake Type: Linear Pull - Pad Attachment Style: Threaded Post - Pad Type: Replacement Insert - Cartridge - Rim Compatibility: Standard
This replacement Shimano bar-end shifter segment unit is the expansion core that goes inside the handlebar. These can become damaged in a crash or during installation or uninstallation.
Shimano Tiagra 4700 Right STI Lever Name Plate and Fixing Screw
- Replacement chain pin for 7- and 8-speed Shimano chains - 3 replacement pins per pack
$8.00 - $17.00
Shimano Deore XT M8000-GS Rear Derailleur Cage Plate
- Replacement plate for M7000-GS rear derailleur - Choose Inner or Outer
- Replacement chain pins for Shimano 11-speed chains - Compatible with CN7900/7801 chains - 3 pins per pack
- Replacement pins for 9-speed Shimano chains - Compatible with CN-7700/HG92 chains - 3 replacement pins per pack
This outer receiver unit works with the CJ-S700 Cassette Joint Unit for Shimano Alfine SG-S700 internally geared hub. This part can become worn, cracked, or torn, exposing the shift cable and possibly other components to unwanted dirt, water, mud, you name it. You don't want that.
Shimano XT RD-M786-GS Rear Derailleur Inner Cage Plate - "B" fit for XTR RD-M986-GS, Deore RD-M615-GS, RD-M610-GS - OEM inner cage plate for XT RD-M786-GS, SLX RD-M675-GS
$9.00 - $37.00
Shimano SLX M660 9-Speed chainrings get your drivetrain back to optimal operation.
Page 1 of 21 Next page