Filter By:
- Parts & Accessories (27)
- Adults (78)
- Kids (10)
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Helmets

$3.99
Strap divider for thick Lazer helmet straps
COMPATIBILITY
- Blade+ MIPS
- Blade+
- Tonic MIPS
- Tonic
- Coyote MIPS
- Coyote
- Chiru
- Next+
- Cameleon MIPS
- Compact DLX MIPS
- Compact DLX
- Compact
- J1
- Gekko MIPS
- Gekko
- Lil'Gekko MIPS
- Lil'Gekko
- ATTACHMENT: strap
- WEIGHT: 3g
- MATERIAL: Nylon

$3.99
Strap divider for thin Lazer helmet straps
COMPATIBILITY
- Bullet 2.0
- G1 MIPS
- G1
- Z1 MIPS
- Z1
- Century MIPS
- Century
- Victor
- Wasp Air Tri
- Impala
- ATTACHMENT: strap
- WEIGHT: 3g
- MATERIAL: Nylon

$4.99
Buckle for thick Lazer helmet straps.
COMPATIBILITY:
- Blade+ MIPS
- Blade+
- Tonic MIPS
- Tonic
- Coyote MIPS
- Coyote
- Chiru
- Next+
- Cameleon MIPS
- Compact DLX MIPS
- Compact DLX
- Compact
- J1
- Gekko MIPS
- Gekko
- Lil'Gekko MIPS
- Lil'Gekko
- ATTACHMENT: strap
- WEIGHT: 5g
- MATERIAL: Nylon

$5.99
- Made in the USA
- Enables Take a Look Original Eyeglass Mirror to fit helmets
- Does not work with Take a Look Compact Eyeglass Mirror

$5.99
Compatible with Shiner and Shiner Back lights
- Rubber pad with loop straps to quickly mount and remove light for recharging
- 50mm bolt spacing to fit most rear racks

$6.99
Screws for Impala visor.
- COMPATIBILITY: Impala MIPS, Impala
- WEIGHT: 1g
- MATERIAL: Aluminum

$6.99
Freshen up the interior of your helmet with a new pad set!
- Replacement pads for Jackal helmets

$9.99
Freshen up the interior of your helmet with a new pad set! Padset details listed below.
Replacement padset for Lazer Bullet and Bullet MIPS helmets. Set includes six pads - Two front pads, two top center pads, two top side pads.
- COMPATIBILITY: Bullet, Bullet 2.0
- ATTACHMENT: velcro
- WEIGHT: 12g
- MATERIAL: Foam

$9.99
Camera mount for Jackal and Impala helmets.
- COMPATIBILITY: Jackal MIPS, Jackal, Impala MIPS, Impala
- ATTACHMENT: Velcro
- WEIGHT: 13g
- MATERIAL: Nylon

$9.99
Freshen up the interior of your helmet with a new pad set! Padset details listed below.
Replacement padset for Lazer Cameleon MIPS helmet. Set includes four pads - front pad, two top side pads and top center pad.
- COMPATIBILITY: Cameleon MIPS
- ATTACHMENT: velcro
- WEIGHT: 12g
- MATERIAL: Foam

$9.99
Freshen up the interior of your helmet with a new pad set! Padset details listed below.
Replacement padset for Lazer Coyote and Coyote MIPS helmets. Set includes three pads - One front/top pad and two top side pads.
- COMPATIBILITY: Coyote MIPS, Coyote
- ATTACHMENT: velcro
- WEIGHT: 12g
- MATERIAL: Foam

$9.99
Freshen up the interior of your helmet with a new pad set!
Replacement padset for Lazer Urbanize MIPS helmets. Set includes two pads - one front pad and one top center pad
COMPATIBILITY
- Urbanize MIPS
- ATTACHMENT: velcro
- WEIGHT: 12g
- MATERIAL: Foam

$10.00
- Replacement X-Static pads for Lazer's Wasp Air Helmet
- X-Static pads are an anti-microbial, self-cleaning pad system

$11.95
This helmet mount works with all CatEye Lights. Pair it with the Volt 800 for the ultimate trail solution.

$11.99
A helmet-mounted taillight is an ideal way to help make sure you are seen in low light conditions.
The ATS LED Taillight only fits Lazer helmets equipped with the Advanced Turnfit System.
- COMPATIBILITY: Bullet 2.0, Century MIPS, Century, Wasp Air Tri, Victor, Impala MIPS, Impala, Urbanize MIPS
- BATTERY TYPE: LR41 button battery
- RUN TIME: 37 hours
- LUMENS: 4 lumens
- ATTACHMENT: ATS dial
- WEIGHT: 15g
- MATERIAL: Nylon

$14.99
Visor for Impala helmet
COMPATIBILITY
- Impala MIPS
- Impala
- ATTACHMENT: Direct Mount
- WEIGHT: 45g
- MATERIAL: Nylon

$19.99
Keep the rain, snow and mud from getting inside your helmet, or use as a quick aerodynamic solution to close off the front and side vents. Aeroshell is a great accessory for compatible Lazer helmets!
The Aeroshell is a plastic cover, designed to fit perfectly over specific models of Lazer helmets. The Aeroshell snaps into place and protects the riders head from wind and rain while still allowing for some air movement under the front of the helmet and out the rear vents. The Aeroshell is unique in that it is easily removed from the helmet when riding conditions are such that additional ventilation is desired. Snap it on when the rain is pouring down and pull it off when the sun starts to shine, the Aeroshell is the perfect tool for every possible condition. Additionally, the Aeroshell provides a significant increase in Aerodynamic performance once it is installed on the helmet. By closing off the ventilation holes, the amount of aerodynamic drag the helmet creates is strongly reduced, making your road helmet into an aero helmet and resulting in a faster ride.
- COMPATIBILITY: Blade+ MIPS, Blade+, Blade, Blade MIPS
- ATTACHMENT: Blade or Blade+ helmet
- WEIGHT: 45g
- MATERIAL: Polycarbonate

$22.99
Keep the rain, snow and mud from getting inside your helmet, or use as a quick aerodynamic solution to close off the front and side vents. Aeroshell is a great accessory for compatible Lazer helmets!
The Aeroshell is a plastic cover, designed to fit perfectly over specific models of Lazer helmets. The Aeroshell snaps into place and protects the riders head from wind and rain while still allowing for some air movement under the front of the helmet and out the rear vents. The Aeroshell is unique in that it is easily removed from the helmet when riding conditions are such that additional ventilation is desired. Snap it on when the rain is pouring down and pull it off when the sun starts to shine, the Aeroshell is the perfect tool for every possible condition. Additionally the Aeroshell provides a significant increase in Aerodynamic performance once it is installed on the helmet. By closing off the ventilation holes, the amount of aerodynamic drag the helmet creates is strongly reduced, making your road helmet into an aero helmet and resulting in a faster ride.
Sizing:
- Small = 52 – 56cm
- Medium = 55 – 59cm
- Large = 58 – 61cm

$22.99
Keep the rain, snow and mud from getting inside your helmet, or use as a quick aerodynamic solution to close off the front and side vents. Aeroshell is a great accessory for compatible Lazer helmets!
The Aeroshell is a plastic cover, designed to fit perfectly over specific models of Lazer helmets. The Aeroshell snaps into place and protects the riders head from wind and rain while still allowing for some air movement under the front of the helmet and out the rear vents. The Aeroshell is unique in that it is easily removed from the helmet when riding conditions are such that additional ventilation is desired. Snap it on when the rain is pouring down and pull it off when the sun starts to shine, the Aeroshell is the perfect tool for every possible condition. Additionally the Aeroshell provides a significant increase in Aerodynamic performance once it is installed on the helmet. By closing off the ventilation holes, the amount of aerodynamic drag the helmet creates is strongly reduced, making your road helmet into an aero helmet and resulting in a faster ride.

$24.99
Keep the rain, snow and mud from getting inside your helmet, or use as a quick aerodynamic solution to close off the front and side vents. Aeroshell is a great accessory for compatible Lazer helmets!
The Aeroshell is a plastic cover, designed to fit perfectly over specific models of Lazer helmets. The Aeroshell snaps into place and protects the riders head from wind and rain while still allowing for some air movement under the front of the helmet and out the rear vents. The Aeroshell is unique in that it is easily removed from the helmet when riding conditions are such that additional ventilation is desired. Snap it on when the rain is pouring down and pull it off when the sun starts to shine, the Aeroshell is the perfect tool for every possible condition. Additionally, the Aeroshell provides a significant increase in Aerodynamic performance once it is installed on the helmet. By closing off the ventilation holes, the amount of aerodynamic drag the helmet creates is strongly reduced, making your road helmet into an aero helmet and resulting in a faster ride.
- COMPATIBILITY: G1 MIPS, G1
- ATTACHMENT: G1 helmet
- WEIGHT: 45g
- MATERIAL: Polycarbonate

$24.99
Keep the rain, snow and mud from getting inside your helmet, or use as a quick aerodynamic solution to close off the front and side vents. Aeroshell is a great accessory for compatible Lazer helmets!
The Aeroshell is a plastic cover, designed to fit perfectly over specific models of Lazer helmets. The Aeroshell snaps into place and protects the riders head from wind and rain while still allowing for some air movement under the front of the helmet and out the rear vents. The Aeroshell is unique in that it is easily removed from the helmet when riding conditions are such that additional ventilation is desired. Snap it on when the rain is pouring down and pull it off when the sun starts to shine, the Aeroshell is the perfect tool for every possible condition. Additionally, the Aeroshell provides a significant increase in Aerodynamic performance once it is installed on the helmet. By closing off the ventilation holes, the amount of aerodynamic drag the helmet creates is strongly reduced, making your road helmet into an aero helmet and resulting in a faster ride.
- COMPATIBILITY: Z1 MIPS, Z1
- ATTACHMENT: Z1 helmet
- WEIGHT: 45g
- MATERIAL: Polycarbonate

$30.00 - $85.00
$85.00
Up to 65% Off
TACKLE NEW TRAILS.
With authentic off-road style and a comfortable fit, this helmet delivers it all for aspiring adventurers.
FEATURES
- We've got you covered! 1 year crash replacement program.
- Created for the off-road enthusiast seeking performance features but with budget in mind
- Trail-specific design with extended rear coverage
- Airflow ventilation system with deep internal airflow channels for cooling
- Cinch Pro fit system offers optimal coverage by cradling the occipital bone for full protection, support and comfort
- Removable, moto-style extended protection side-snap visor
- Integrated magnetic mount for the Numen+ Link taillight and GoPro compatible mounting surface
- MIPS mimics the brain's own protection system by adding a low friction layer between the head and the helmet reducing rotational violence that causes strain to the brain at angled impacts
SPECIFICATIONS
- Western: S (51-55cm);M (55-59cm);L (59-63cm)
- Weight: 365g (size M)
- Certifications: CPSC/CE;AS/NZS)

$30.00
$100.00
70% Off
With authentic off-road style and a comfortable fit, this helmet deLivers it all for aspiring adventurers. Integrated features including a camera mount and compatibility with the Giant Numen Link taillight make it easy to customize your ride.
- We've got you covered! 1 year crash replacement program.
- Trail specific design. Purpose built for aggressive trail and enduro riding. Rail features a new shape with extended rear coverage.
- A total of 18 vents with straight, non tapered walls, designed and positioned for off-road performance. The size and shape of the vents helps guide airflow through interior channels to maximize ventilation at low and high speeds for better cooling
- Cinch Pro Fit system.
- Integrated magnetic mount for the Numen+ Link and Recon TL
- MIPS mimics the brain's own protection system by adding a low friction layer between the head and the helmet reducing rotational violence that causes strain to the brain at angled impacts

$35.00
Strap dividers for thick Lazer helmet straps
COMPATIBILITY
- Blade+ MIPS
- Blade+
- Tonic MIPS
- Tonic
- Coyote MIPS
- Coyote
- Chiru
- Next+
- Cameleon MIPS
- Compact DLX MIPS
- Compact DLX
- Compact
- J1
- Gekko MIPS
- Gekko
- Lil'Gekko MIPS
- Lil'Gekko
- ATTACHMENT: strap
- MATERIAL: Nylon

$35.99
TEAM TODDLER.
For the youngest riders, age 5 and under, protection is the first priority. The new Holler helmet makes it fun and easy.
FEATURES
- Designed with fit and function in mind to create a value-packed helmet to keep young cyclists comfortable and protected
- TransTextura Plus anti-microbial padding helps fight bacteria growth and reduce odor
- Low- and high-speed impact-tuned construction with optimized low-density EPS
- New Bug Net to keep bugs out of the helmet
- New Cinch Jr. Dial fit system offers optimal coverage by cradling the head for full protection
- Integrated foam visor
SPECIFICATIONS
- Toddler: 46-51cm
- Age: 5 and under
- Certifications: CPSC/CE;AS/NZS

$35.99
Designed with fit and safety in mind—Musa is a fun and value packed helmet for young riders (from 4 - 10 years). Featuring in-molded polycarbonate shell and integrated foam visor for increased protection.
FEATURES
- We've got you covered! 1 year crash replacement program.
- TransTextura Plus anti-microbial padding helps fight bacteria growth while the natural property of the fabric inhibits microbes that cause odors
- Low- and high-speed impact-tuned construction with optimized low-density EPS, and an ultra-thin toughened polycarbonate shell
- New dial fit system offers optimal coverage by cradling the head for full protection, support and comfort with an easy dial function
- Integrated foam visor
SPECIFICATIONS
- Child: 50-55cm
- Age: 4-10 years
- Certifications: CPSC/CE;AS/NZS

$39.99
PROTECTION MADE EASY.
For young riders, protection is the first priority. The new Hoot helmet makes it easy.
FEATURES
- We've got you covered! 1 year crash replacement program.
- Designed with fit and function in mind to create a value-packed helmet to keep young cyclists comfortable and protected
- TransTextura Plus anti-microbial padding helps fight bacteria growth and reduce odors
- Low- and high-speed impact-tuned construction with optimized low-density EPS
- New Cinch Jr. Dial fit system offers optimal coverage by cradling the head for full protection
- Integrated foam visor
SPECIFICATIONS
- Child: 50-55cm
- Age: 4-10 years
- Certifications: CPSC/CE;AS/NZS

$40.00
The Chakra Child features Kali's Composite Fusion technology, in-mold construction, and extended rear coverage for added safety and protection. A visor molded directly into the shell and a dial closure system will give any child the confidence and motivation to get out and ride.
- Washable, anti-microbial, moisture wicking pads
- Polycarbonate shell with EPS foam
- Integrated visor
- 21 vents provide maximum airflow
Page 1 of 4
Next page